IPN8710 anticorrosive steel pipe is a specially treated anticorrosive steel pipe, which is characterised by excellent anticorrosive properties and good mechanical strength. The anti-corrosion performance of this steel pipe is mainly due to a special anti-corrosion coating coated on its surface. This coating is a mixture of epoxy resin, polyethylene, polyamide and other materials, which has good corrosion resistance, abrasion resistance and high temperature resistance.
IPN8710 drinking water coating film non-toxic, high solid, low viscosity is a strong adhesion, high strength, abrasion resistance, hydrolysis resistance, corrosion resistance and water resistance, weathering is very good new anticorrosive coatings. Corrosive media in the water pipeline are more varied, there are acids, alkalis, salts, oxidants and water vapour, etc., the coating must be chemically inert, acid, alkali and salt corrosion resistance, the coating film should be structurally dense, waterproof penetration is good, strong adhesion, tough and plump.
IPN8710-1: composed of polyurethane polyethylene, modified epoxy resin, non-toxic antirust pigment filler, additives, etc., curing at room temperature to form an interpenetrating network, the coating film structure is dense, resistant to acid, alkali, salt, rust and corrosion performance is excellent, strong adhesion. ipn8710-2a: composed of epoxy, rubber resin modified, non-toxic, rust pigment filler, additives, etc., excellent resistance to chemicals, non-toxic, rust pigment filler. Excellent chemical resistance, non-toxic, anti-microbial erosion.
Use: IPN8710-1 is used for anticorrosive primer coating on the inner wall of water supply pipeline; IPN8710-3 is used for anticorrosive top coating on the inner wall of water supply pipeline. Applicable to petroleum, chemical, electric power, gold, transport, food, gas cabinets, pipelines, storage tanks and other equipment and facilities, the inner wall of the steel structure and concrete surfaces for long-lasting anti-corrosion coatings can also be used as buried pipeline internal and external wall corrosion and cooling towers inside the wall of the anti-corrosion coating, cyanide corrosion coatings belong to the aromatic urethanes, with superior resistance to chemicals, heat and radiation resistance, coating film physical and mechanical properties, high strength, abrasion resistance and has a glossy, anti-wear, and water resistance, weatherability is very good. Wear-resistant and glossy, anti-corrosion performance is excellent film resistance to oil, alkali, acid, salt, industrial waste gas, mainly used for concrete surfaces, chemical equipment, pipelines, tanks, as well as sluice gates, dams, wharves, mines, and other facilities or equipment anticorrosion.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)