ASTM A53 Carbon Steel Seamless Pipe

Introduction

ASTM A53 is a carbon steel alloy, which can be used as structural steel or for low-pressure pipelines.

ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26. A53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines.

A53 pipe comes in three types (F, E, S) and two grades (A, B).
A53 Type F is manufactured with a furnace butt weld or may have a continuous weld (Grade A only)
A53 Type E has an electric resistance weld (Grades A and B)
A53 Type S is a seamless pipe and found in Grades A and B)

Specification

Technical Data

Chemical Properties %

/	Grade	C, max	Mn, max	P, max	S, max	Cu*, max	Ni*, max	Cr*, max	Mo*, max	V*, max
Type S (Seamless)	A	0.25	0.95	0.05	0.05	0.4	0.4	0.4	0.15	0.08
Type S (Seamless)	B	0.3	1.2	0.05	0.05	0.4	0.4	0.4	0.15	0.08
Type E (Electric-resistance Welded)	A	0.25	0.95	0.05	0.05	0.4	0.4	0.4	0.15	0.08
Type E (Electric-resistance Welded)	B	0.3	1.2	0.05	0.05	0.4	0.4	0.4	0.15	0.08
Type F (Furnace-welded)	A	0.3	1.2	0.05	0.05	0.4	0.4	0.4	0.15	0.08

*The total composition for these five elements shall not exceed 1.00%

Mechanical Properties

	Grade A	Grade B
Tensile Strength, min., psi, (MPa)	48,000 (330)	60,000 (415)
Yield Strength, min., psi, (MPa)	30,000 (205)	35,000 (240)

(Note: This is summarized information from ASME Specification A53. Please refer to the specific Standard or Specification or contact us for more details.)

Production process

Seamless steel pipe manufacturing process is divided into hot-rolled and cold seamless pipe.
1. Production process of hot-rolled seamless steel pipe: tube billet → heating → perforation → three-roller/cross-rolling & continuous rolling → de-pipe → sizing → cooling → straightening → hydraulic test → marking → seamless steel pipe with leverage effect detected.
2. Production process of cold drawn seamless steel tubes: tube blank → heating → perforation → heading → annealing → pickling → oiling → multiple cold drawing → blank tube → heat treatment → straightening → hydraulic test → marking → storage.

FAQ

1.Q: Are you a factory or trading company?
A: We are professional manufacturer, and our company also is a very professional a trade company for steel products.We can provide a wide range of steel products.

2.Q:What do your factory do regarding quality control?
A: We have obtained ISO, CE and other certifications. From materials to products, we check every process to maintain good quality.

3.Q: Can I get samples before order ?
A: Yes, of course. Usually our samples are free. we can produce by your samples or technical drawings.

4.Q:How do you make our business long-term and good relationship?
A:We keep good quality and competitive price to ensure our customers benefit ; We respect every customer as our friend and we sincerely do business and make friends with them. No matter where they come from.

5.Q:what is your delivery time ?
A: Our delivery time is about one week, timing according to the number of customers.

Projects

Stainless Steel Pipe Application

Feb 07, 2023

Stainless steel pipe is a kind of hollow long round steel, mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instrumentation and other industrial transmission pipeline and mechanical structure parts, etc., also widely used in the manufacture of mechanical parts and engineering structures. It is also commonly used as furniture and kitchenware, etc.

View More +

Seamless Pipe Application

Feb 07, 2023

Seamless steel pipes are used in fluid transportation pipes, boiler plants, engineering, and mechanical processing plants.

View More +

Square Tube Application

Feb 07, 2023

Rectangular tube is a kind of hollow long steel, also called flat tube, flat square tube or square flat tube (as the name implies). With the same bending and torsional strength, it is lighter in weight, so it is widely used for manufacturing mechanical parts and engineering structures.

View More +

Stainless Steel Pipe Application

Feb 07, 2023

View More +

Steel Pipe Pile Application

Feb 07, 2023

Steel pipe piles are suitable for foundations in wharf and harbor construction, and their diameters generally range from 400-2000mm, with the most commonly used at 1800mm.

View More +

Carbon Steel Pipe Application

Feb 07, 2023

Carbon steel pipe carbon steel pipe is divided into two categories: hot-rolled and cold-rolled (drawn) steel pipe. The hot-rolled carbon steel pipe is divided into: ordinary steel pipe, low and medium pressure boiler steel pipe, high pressure boiler steel pipe, alloy steel pipe, stainless steel pipe, petroleum cracking pipe, geological steel pipe and other steel pipe.

View More +

Welded Pipe Application

Dec 27, 2022

Welded pipes are further divided into general welded pipes, galvanized welded pipes, oxygen blown welded pipes, electric wire casing, metric welded pipes, roller pipes, deep well pump pipes, automotive pipes, transformer pipes, electric welded thin-walled pipes, electric welded shaped pipes and spiral welded pipes according to their applications.

View More +

Welded Pipe Application

Dec 27, 2022

View More +

Square Tube Application

Feb 07, 2023

View More +

Steel Pipe Pile Application

Feb 07, 2023

Steel pipe piles are suitable for foundations in wharf and harbor construction, and their diameters generally range from 400-2000mm, with the most commonly used at 1800mm.

View More +

Introduction to our quality control

Gnee steel group is a supply chain integrated enterprise including steel plate, coil, profile, outdoor landscape design and processing.

Patents

FAQ

We have a certain scale capacity to ensure your order delivery cycle.

Are you a factory or trading company?

We are professional manufacturer, and our company also is a very professional a trade company for steel products. We can provide a wide range of steel products.

Can I get samples before order ?

Yes, of course. Usually our samples are free. we can produce by your samples or technical drawings.

What is our quality inspection standard?

Our key qualities and services comprise of:
• Quality assured goods
• Multiple payment modes
• Experienced crew
• Prompt shipment
• Ethical business policies
• Wide distribution network

Which certifications have we acquired?

GNEE Steel Pipe has the following certification:
• GST CERTIFICATE
• CERTIFICATE OF INCORPORATION
• CERTIFICATE OF IMPORT EXPORT CODE
• ISO CERTIFICATE
• CE CERTIFICATE
• MANUFACTURING CERTIFICATE

Can GNEE Steel Pipe customise the design as per my requirement?

Yes, GNEE Steel Pipe specializes in precisely manufacturing products according to the customers unique needs and requirements.

GNEE Steel Pipe is strategically located to serve the entire country and the whole world’s Alloy Pipe, Low Temperature Pipe, Boiler&Heat exchanger Tube, high-strength structural pipe ,Stainless steel & carbon steel pipes/tubes, and pipe fittings’ requirements.

View More +

Products

Seamless Pipe

Alloy Steel Pipe

Stainless Pipe

API 5L Pipe

Aluminum Pipe

Carbon steel Pipe

Square Tube

API Oil Pipe

Welded Pipe

Steel Pipe Pile